need little o ring that goes on hard line to f.p. reg

[turbo john FL]

can anyone tell me where i can get one of those little o rings that go on the hard line where it screws into the fuel pressure regulator ? thanks in advance JOHN

 

[Phoneguy]

Your local parts store, NAPA, Autozone, etc

Bryan

 

[turbo john FL]

actually tried napa , autozone nobody had any small orings like that to be used in gasoline , just regulat black o rings which ive been told will not last long

 

[QUIP'6']

http://m.advanceautoparts.com/mt/sh...t-bwd_20960843-p?searchTerm=fuel+line+o+rings

 

[blackgn1]

Harbor frieght has a o-ring pack. Has all the hard to find gm o-rings. I keep several kits here all the time. It's in a plastic box with tons of different sizes.

 

[williamsGN]

and if like here in CA, you don't have Advance, maybe something like this would work

http://www.autozone.com/autozone/accessories/Tools-Garage-and-Equipment/Fuel-Injector-O-Ring/_/N-25hc?filterByKeyWord=fuel injector o rings&fromString=search

 

[Blazer406]

I've seen o-ring assortments in the "help" section at Autozone and other parts houses.... I believe the correct orings are brown.....

 

[turbo john FL]

yes its a little brown o ring . im heading for a near by advance auto now and keeping my fingers crossed ; )

 

[QUIP'6']

yes its a little brown o ring . im heading for a near by advance auto now and keeping my fingers crossed ; )

sent You the link for the feed at rail and the return under the regulator

 

[Gnx6]

These "hard to find o-rings" are readily available at almost any GM dealer. May be easier than dealing with dummies at parts stores. There are 2 sizes, a small and a large. Small on the return lines and large on the feed lines, including at the filter. Always a good idea to change whenever disturbing the connections. 10 bucks is cheap insurance over a fire...

 

[TR Custom Parts]

Pep Boys has them as well.

 

[scojack_2001]

These "hard to find o-rings" are readily available at almost any GM dealer. May be easier than dealing with dummies at parts stores. There are 2 sizes, a small and a large. Small on the return lines and large on the feed lines, including at the filter. Always a good idea to change whenever disturbing the connections. 10 bucks is cheap insurance over a fire...

FYI these 0-rings are the same as the ones from the TBI truck motors. I'm sure GM used that same style fuel line setup in everything. I think I even have a few here.

 

[Gnx6]

These look correct as well from Autozone:
http://www.autozone.com/autozone/ac...25zi?itemIdentifier=238617&_requestid=2540600