new chip??

[mrgriftmore]

Will I have any issues with my TT 93 street chip set up for stock MAF, when I switch to 3.5 w/ trans+ or will I need another chip

 

[Quick6'n'-K.C.]

If you have a Translator or Translator+, it will need to be set correctly for this chip. The BASE setting should be set to match your MAF sensor, and the WOT setting should be at 0. The 4 small white switches should be set to ON, ON, ON, OFF. You can use the BASE rich or lean settings to bump the BLM's up or down if they are more than 10-12 numbers away from 128.


You will not need a new chip


TurboTweak Home

 

[GNsnake]

You can use the chip with any maf, but with only the injectors the chip was burned for.