slimtastic
yea dude...I rock
- Joined
- Aug 9, 2002
ok i got a fresh set of iron heads that i recently got back from S.A.M. here in houston. they were completely cleaned up and machined. ready to drop on and kick some butt
-solvent bath washed/cleaned
-Ferrea 6000 series valves 1.77 intake 1.5 exhaust
-fresh 3 angle valve job
-light cleanup work done in bowl area and intake port entrance to match standard felpro gasket (not 1200)
-lightly resurfaced to true up head surface .010 which puts the cc's to about 44cc
-Stock spring seats machined for hardened springs shims.
-Brand new Comp 980 springs installed and properly shimmed. max lift on springs is .530
-brand new Viton valve seals
400$ plus shipping
i also have a set of titanium valve spring retainers from comp.
80$ to your door
-solvent bath washed/cleaned
-Ferrea 6000 series valves 1.77 intake 1.5 exhaust
-fresh 3 angle valve job
-light cleanup work done in bowl area and intake port entrance to match standard felpro gasket (not 1200)
-lightly resurfaced to true up head surface .010 which puts the cc's to about 44cc
-Stock spring seats machined for hardened springs shims.
-Brand new Comp 980 springs installed and properly shimmed. max lift on springs is .530
-brand new Viton valve seals
400$ plus shipping
i also have a set of titanium valve spring retainers from comp.
80$ to your door