Nitrous Spray Bar In N/A Manifold
- Thread starter KWIKR 1
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
125-175 shot . using a Wilson elbow don't want to put a spacer under because of limited space . also looking for who makes a plate that would fit a Accufab Ford 90mm TB rather than putting the spray bar in the manifold . I've contacted a few nitrous outfits and hoping I here back from them on the TB plate . thanks .
I think I found what I'm looking for . 
Nitrous Outlet Online Catalog Nitrous Outlet 90mm LSX Single Stage Plate Conversion
Nitrous Outlet Online Catalog Nitrous Outlet 90mm LSX Single Stage Plate Conversion
Attachments
dr_frankenstein
Mad Scientist
- Joined
- Mar 17, 2008
- Messages
- 5,126
I would agree to go with that plate over the spary bar style.
depending on where you locate your bottle and solenoids I have always had alot of thermo-surge with the plate style when you push 125hp.
in my opinion, that surge is destructive.
but in going with a Jet style, your system will "Hit" alot harder than that plate... keep that in mind for traction!
A.j.
depending on where you locate your bottle and solenoids I have always had alot of thermo-surge with the plate style when you push 125hp.
in my opinion, that surge is destructive.
but in going with a Jet style, your system will "Hit" alot harder than that plate... keep that in mind for traction!
A.j.
I like the idea of injecting further upstream from the manifold if you can't go with direct port.
You're going to have enough issues to take care of. You don't need the problem of correcting distribution problems with the nitrous system too.
Are you injecting just to spool, or are you planning on injecting further down the track?
You're going to have enough issues to take care of. You don't need the problem of correcting distribution problems with the nitrous system too.
Are you injecting just to spool, or are you planning on injecting further down the track?
Plan on injecting on the big end of the track or playing around on the street . I'm having a hard time finding a plate for this TB . The LS bolt spacing on the plates available don't match the Accufab . The NOS one shown has a 4 1/4" across , 2 7/8" down . The accufab aprox is 3 7/16" - 3 1/2" spacing on all 4 . still waiting to hear back from a few other outfits . Thanks for your input guys .
