No Brake Fluid coming out of rear wheel cylinders???

[Chris McDade]

Im trying to bleed my brakes. Im getting fluid from the front wheels, but not the back. No, fluid is coming from either wheel cylinder. Peddle is hard.

When I open the rear wheel cylinder to bleed it the peddle does not move.

Any Suggestions? Maybe porportioning (spelling) valve?

Thanks in advance.

 

[novaderrik]

pull the bleeders all the way out and see if fluid comes out the hole.
if so, then the bleeders need to be cleaned out- use a small drill bit and some carb cleaner to do it, or just buy some new bleeder screws and get some of those nifty plastic caps to keep the dirt out.

 

[Chris McDade]

I will give it a shot in the morning. Thanks

 

[Chris McDade]

OK, Still can't get the rear brakes to bleed? This is a vacum brake setup.

I've bench bleed the the cylinder. Then put it on the car. When I first put it on I will get some fluid out of the right when, but when I try to do it again I get no fluid.

The peddle does not move when i crack open the bleeder on the rear.

What is the deal with the pin thing? Is this the one on the por. valve?