no front brakes

[87ttypeV8]

well i just put on new rotors/calipers/pads and all new bearings...

well i bled the brakes and now i have no front brakes... i have been pumping them for 10 minutes and nothing is going on...

i have done it with ign on and then tried with ign off... i have plenty of fluid and just wondering WTF is going on!?!?

anyone please help?

 

[RBruton]

I was told to bleed with the ignition off starting with rear passenger, then rear driver, then front passenger and then front driver. You'll need to with the ignition off pump the brakes 15 to 20 times, check your fluid and fill as required then start bleeding as indicated above. Keep repeating the procedure until the desired results are achieved. Generally its seems like when its bled properly it will happen all of a sudden.

 

[fast eddie]

87ttypev8

Did you get any air in the mastercylinder?
Ed

 

[87ttypeV8]

no dont think so... i bled the pass side first and then the drivers... fluid was coming out in a good stream... refilled the fluid and continued to pump brakes... just never got pressure

i will drive very cautiously around the subs and maybe that will cure it... luckily i have 2 cars to drive though!...

i dont think it is anything major though... must just have to keep pumping!