You can type here any text you want

No Motivation

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
If I could only afford to come out from Phoenix and give you a run for your money..........

But no.

However, that should motivate you to beat up on the Mid West and South East guys, anyway..... ;)
 
If I could only afford to come out from Phoenix and give you a run for your money..........
I got high hopes for this motor . It's a high compression E85 stroker Dave Husek built for me . Our only concern is the converter , it may need tweeking .
 
Well hear we go AGAIN !! ............ New motor still on the stand waiting to be installed , updated 5 point harness in the box waiting , and a new trans shifter cable sitting in the box on the back seat . In fareness to myself , I have been remodeling my master bathroom and I hate drywalling . Making a move on the car this weekend cause I'm going to BG in May !
Anyone else need a kick in the pants to get going ???
stop posting and get going ;)
 
Finally progress , first I cleaned the garage ( swept up ) , removed the "old " 5 point harness & installed the new one . I remounted the seat track covers from when I repaired the power seat transmission . Getting ready to paint the roll bar and scoped out the mounting of suspension limiting straps for the rear end . Not quite sure how I'm going to mount the straps , anyone have suggestions ? I have a fabricated 9" rear end so it pushes mounting locations outward .
Anyone looking for a Simpson Platinum 5 point camlock harness ?? It's SFI dated to 2019 that's why I changed it , but it is in perfect condition .
 

Attachments

  • 0 bytes · Views: 72
Finally progress , first I cleaned the garage ( swept up ) , removed the "old " 5 point harness & installed the new one . I remounted the seat track covers from when I repaired the power seat transmission . Getting ready to paint the roll bar and scoped out the mounting of suspension limiting straps for the rear end . Not quite sure how I'm going to mount the straps , anyone have suggestions ? I have a fabricated 9" rear end so it pushes mounting locations outward .
Anyone looking for a Simpson Platinum 5 point camlock harness ?? It's SFI dated to 2019 that's why I changed it , but it is in perfect condition .

I have that same harness on my easy lift recliner! :ROFLMAO:

 
Motor in , car started right up , good oil pressure and NO leaks anywhere !!
Thanks to Bill Brooks & Joey D. for helping me get the motor in .
I'll see you guys in BG next week !!
 
Back
Top