no oil to turbo
- Thread starter flyhigh
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
- Joined
- Feb 18, 2006
- Messages
- 10,084
It the line kinked? Remove the line from the brass T and see your getting oil there.
puttins oil pressur guage line to brass t will get back with results thanks
- Joined
- Aug 1, 2003
- Messages
- 9,726
pull the turbo oil feed tubing off and see if you can blow through it
your first post stated you had "good oil pressure" , if thats true your readings should be coming from the bras tee ..so i dont understand your second post that you were "puttins oil pressur gauge line to brass t".. ???
maybe its too early to expect posts to make sense .. but where were you getting your good oil pressure reading from ??
your first post stated you had "good oil pressure" , if thats true your readings should be coming from the bras tee ..so i dont understand your second post that you were "puttins oil pressur gauge line to brass t".. ???
maybe its too early to expect posts to make sense .. but where were you getting your good oil pressure reading from ??
Last edited:
- Joined
- May 28, 2001
- Messages
- 16,728
What Paul said^^
If you are relying on the idiot lite.....it goes out @ about 4psi.
If you are relying on the idiot lite.....it goes out @ about 4psi.
salvageV6
Daily Driver
- Joined
- May 25, 2001
- Messages
- 20,986
He's probably putting the gauge up top at the turbo where a lot of lazy people like me put it. 
oil line was stopped up problem fixed with new line thanks every one for help quick response
- Joined
- May 28, 2001
- Messages
- 16,728
"checked oil line to turbo stared engine ran 1 min good oil press but no oil at turbo line"
1 min no oil to turbo?? I wonder how long that will last? Was the replacement due to previous turbo failure?
previous turbo shot lack of oil line was coked up hi heat cooked oil
