NO Spark

[1NASTYGN]

Replaced Cam sensor cap, tried to fire car and no spark. checked power to ECM and ok. Cam led lights up when cranking. Checked crank sensor (going to replace today). Checked oil sending unit for proper connection, ok. Checked all fuses, ok.
Anything I could be missing?

 

[Bescurred]

HTHs

http://www.vortexbuicks-etc.com/no_start_tree.htm

 

[TurboBuRick]

Key on engine off check for power (12vdc) on pins P and M of the ignition module plug and get rid of the led cap.

Rick

 

[Dreamcar86]

Did you check the interrupter ring to make sure it does not spin freely or have play in it on the cam sensor?

 

[Chuck Leeper]

............

 

[1NASTYGN]

Replaced crank sensor and car fired right up. Thank you all for the response and advice!