oil cooler lines

[Gn-Krazzie]

My stock oil cooler lines have given up the ghost ! I am thinking about replacing them with Aeroquip stainless steel lines and fittings. Has anyone done this before?? I need to know what the fitting sizes/type are going into the cooler and on the other end into the filter. TIA

 

[Gn-Krazzie]

ttt

 

[Steve Wood]

1/2" pipe will fit the cooler adapter end. I have forgotten what screws into the radiator if you are using that cooler. I think it was a standard pipe, tho.

I used -8 line once but I think with an aftermarket cooler with 1/2" pipe fittings, I would use -10 after comparing hole sizes the other day.

 

[Gn-Krazzie]

Thanks steve i appreciate the reply. Yes i am using the stock cooler. It appears to be the same thread size on the cooler as well. 1/2 Npt it is !!!! . Now all i have to do is source down aeroquip in Canada .

 

[Roger]

Eastern Performance - braided stainless lines, about $100.