You can type here any text you want

Oil Idiot Light Sender

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Heg87t

Slightly Compressed User
Joined
Mar 18, 2006
Messages
1,056
Hey,

Is there another sender/switch for the stock dash idiot light that activates at 20 or even 10 pounds pressure. I don't like the idea that the stock one comes on at 4 pounds! By that time the engine is hurt!
(Yes, I know that is why they are called idiot lights :biggrin: )
 
Is there another sender/switch for the stock dash idiot light that activates at 20 or even 10 pounds pressure. I don't like the idea that the stock one comes on at 4 pounds! By that time the engine is hurt!

Probably not since many of our cars normally operate within that pressure range once the oil warms up. We would all be idiots everywhere we went:biggrin:
 
Think that's why most end up going to the oil pres. gauge. Idiot lights are just cheap.
 
Think that's why most end up going to the oil pres. gauge. Idiot lights are just cheap.
I have a gage on the dash in front of the passenger. Just looking for something that can flag me that something is wrong if I am not looking at the gage. I was looking at the Reb-co warning lights and thinking about those.
 
I have a gage on the dash in front of the passenger. Just looking for something that can flag me that something is wrong if I am not looking at the gage. I was looking at the Reb-co warning lights and thinking about those.

Summit used to sell a panel that had an oil and water temp in it that had warning lights that came on. Autometer I believe also makes a warning light that looks like a shift light on a tach that mounts on the steering column.
 
Summit used to sell a panel that had an oil and water temp in it that had warning lights that came on. Autometer I believe also makes a warning light that looks like a shift light on a tach that mounts on the steering column.

Yup. This is kind of what I am thinking about.
 

Attachments

  • Reb-Co_Oil_Pressure_Light_140-1280.jpg
    Reb-Co_Oil_Pressure_Light_140-1280.jpg
    49.1 KB · Views: 115
When I did my VDO gauges, I got their sender that had a dual output. One was 0 - 180 ohm, the other was a 8 psi warning contact for the dash light. No need for a cobbed up mess of 2 senders... ;)
 
I'd try the NAPA 15psi. Hobbs switch for about $35 and it's adjustable under the rubber plug.

You could make your own LED or bulb light and put it anywhere you wanted to easily.

And hopefully tune it downward to 9-10psi. or so. :smile:

Then again that 20psi. Reb-co switch may be adjustable.... :confused:
 
Back
Top