You can type here any text you want

Pistons, Rods, Heads, roller rockers,etc.

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

67turboCamaro

Member
Joined
May 25, 2001
Messages
302
Stage II alum. heads, full port by RSI, titanium valves and keepers, set up for roller cam.
-1 set fresh from machine shop, 240cc intake runners, 45 cc chambers.-$1500
-1 set used but in good condition, 240cc runners, 58cc chambers- $1200
Carrillo rods fresh from machine shop, -$700
Jessell roller rockers Like new dyno use only- $450
Stage II intakes, twisted style like new, -$50
Nascar style timing covers, Like new- $175
Roller cams for use with roller cam bearings- $100
14 bolt dry sump oil pans- $100
Carter mechanical fuel pumps- $30
MSD Pro billett distributors- $100
Bell housing to adapt Buick motor to Chevy manual trans.- $175
Light weight flywheels- MAKE OFFER
BOXES and BOXES of titanium valves-MAKE OFFER
1 Set NEW forged J&E pistons, 4.020, flat top- $500
1 set new J&E rings, 4.020- $100
1 set New forged Wiseco pistons, 3.95, flat top-$400
1 set NEW forged Wiseco pistons, 4.00, flat top- $400
1 Set New forged TRW pistons, 4.015, flat top- $400
1 set used forged TRW pistons, 4.010, flat top- $175
5 used forged Diamond pistons, 3.90, flat top- $125

All parts are + shipping
Serious offers considered. NO TIRE KICKERS PLEASE!!
 
I am sorry but are those diamonds stock bore, if so what condition are they in.
 
Originally posted by 85HOT-T
I am sorry but are those diamonds stock bore, if so what condition are they in.
Nope, stock 3.8 bore is 3.800 and stock 4.1 bore is 3.985 (I think).
 
1 set NEW forged Wiseco pistons, 4.00, flat top- $400

What is the CH on these? Do they come with pins?
 
Originally posted by fuzzyGN
1 set NEW forged Wiseco pistons, 4.00, flat top- $400

What is the CH on these? Do they come with pins?

Compression height is 1.1985, and they include pins and locks.
 
Compression height is 1.1985, and they include pins and locks.

Yikes, a bit short for my application. Thanks for checking.
 
parts

im rebuilding my stock motor what parts do you have that will fit it? thanks
 
off center block?

im interested in the rods if there off- center style, do you have any other big end parts?

thanks Simon:)
 
Back
Top