You can type here any text you want

Please I Need Help

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

scrobbyd

Member
Joined
Jan 7, 2004
Messages
536
Well I thought I was having a leak between my trany and my stall because I just recently had a shift kit and stall put in my GN so I pulled my trany and went and had the front pump seal changed. Than once I got everything bolted up and back in place, started my car and realized my problem was in the lines, they have several holes in them, so I pulled both lines out, what a mess. Anyway I would like to know how are what I can do to replace these lines.:mad:
 
5/16" hard line from any parts store, bend with a tubing bender. Best to use the old lines for a template.

About $4 each for the tubing. maybe $15-20 for the bender, another $20 for a flaring tool or so.
And an afternoon.
 
Thanks For The Quik Reply

If I bend to match old lines what is the easiest way to get them back in without removing the motor. Any advice is greatly appreciated. Thank You Very Much:confused: :D
 
Back
Top