Ported Irons to Champion or TA Heads?

[Sleeper-6]

Alrighty, I can use a little help here in deciding how I want to go about topping off my stroker rebuild. I'm currently working out the details on Girdled 109 stroker engine.

Option 1 : Run the set of ported irons I have been using after getting them freshened up.

Option 2 : Sell the Irons and put the $$ toward a set of Champion or TA heads. Doing this will leave no cash to get them ported.

My question is if it is worth the investment to run a stock set of aluminiums over the ported irons.

 

[matswtt]

subscribe.......
looking to start my winter project with a stroker

any advice?

 

[SNOWBIRD]

Do A Search Ported Irons Will Go A Long Way ...but If All Out 9s Is Your Goal Ported Alu Is The Way To Go ...good Irons Can Do It To ,just Ask Mr,grump...but A Little More Injector Would Help

 

[SNOWBIRD]

Sorry Sleeper ,thought I Saw 60 For Injector

 

[bison]

I would go for the irons and more turbo before i went for the GN1's or other aluminum head. Id get the 6776 S and sell the 61.

 

[WeSS]

heads

This is one of the best articles ever

http://www.turbobuick.com/forums/engine-tech/216319-gn1-rs-ported-unported-stock-heads.html

 

[Boost231]

i would sale your irons and go to a street Eliminator head from TAPerformance

 

[49-blues]

are the exhaust ports all in the same location on the ta s? i heard you need to modify headers or something.