Post pics of your taller valve covers and where you bought them

[Jon01]

I'm going to need to pick up some taller valve covers to clear the T&D's, but am unsure as to who makes what ones and how much they cost, could some of you guys post up some pictures of your covers and where you got em from?
Thanks!
Jon

 

[larry33kc]

Sent you some pics, Not tall V/C but you can use the spacers

 

[TRDirks]

Here is a pic of the vc's I have. I bought them used from a board member but you can get them from alot of the vendors, Cotton's etc...

valve covers

HTH

 

[Carolinaturbot6]

http://www.taperformance.com/vcovers.htm

3rd set of covers down at the link.

 

[Grumpy]

BGC's....

http://hi-techperformance.net/TTA5.JPG

 

[Chris Taylor]

I used the stock vavle covers with my T&D's. I was able to do this with the use of the RJC valve cover spacers. These are awesome and keep the factory look.

 

[Intercooler]

Champion's coated here: http://www.turbobuick.com/forums/showthread.php?s=&threadid=55462&highlight=powdercoat

 

[machinegun]

These are what I use.

http://www.hrpartsnstuff.com\images\engine\buickvalvecoversweb.jpg

 

[Jon01]

Some very sharp looking covers there guys!!
Thanks for taking the time to post the pictures, I'm kinda overwhelmed by all the choices you presented.
Thanks for the help guys!
Jon