PTE bb turbo & shield

[DCVING 6]

Does anyone have close up pictures of a turbo shield modified to fit the coolant lines of a PTE ball bearing turbo. I'd like to see what all has to be done to make it fit.

TIA

 

[87NAT]

The coolant lines fit with no mods. The new oil line needs a notch cut in the sheild though.

 

[DCVING 6]

I'm using a PTE oil saver, so I guess I will just use an old shield to test fit and cut before I go grinding on my nice chrome one.

 

[Sweet6]

what turbo are you getting? :biggrin:

 

[RUQWKNF]

Here is mine.
I will have to get a better picture of it up close tho.

I believe if you have the oil system, you might have just enough room under the cover without having to cut the sheild. The PTE Oil Saver has a 120* feed line fitting that just might clear, I haven't personally checked it yet tho.

HTH

Patrick

 

[DCVING 6]

Guys, thanks for the pics and info. I will try and remember to update this thread once I find out.

 

[conn84gn]

It will clear with the 120 angle fitting for the oil line.
checked mine the other night
I ran the coolant line under the housing rather than over more clearance that way
Look under the BB6776 install thread

 

[Turbo1dr]

I just bent the line down far enough to fit under the shield. You can see it in this picture.