PTE or GN1 stretched stock location intercooler

[coach]

I am really looking for a PTE, but will take a GN1 stretched intercooler. It is the only upgrade I am doing to the motor this off season. The tranny and axles took my budget.

Thanks
Coach

 

[Quick6'n'-K.C.]

Can i get some pictures of that 62 Biscayne ? Ive been trying to buy a 62 cat for awhile, cars are so much fun.


I wouldnt limit your search to just the pte or GN1, the bgc and thunderfab are just as quality, same with the cas and gbody.

turbov6bryan@live.com

BW

 

[coach]

I'm not limiting myself, these are the 2 units I personally have seen. I want a PTE, but cannot afford a brand new one right now. If somone is going front mount and has one for sale, I would take it. I also have seen the GN1 all aluminum unit, not a bad unit for my combo.

Thanks
Coach

 

[ikle]

I have a PTE stretched intercooler,70mm Accufab throttle body and 70mm plenium with RJC power plate and a PTE GT6131bb turbo with actuator and waterline kit all have less than 100 street miles on them if interested e-mail me at vanky935@sbcglobal.net

 

[coach]

You are new here. Post some pics and list the rest of your stuff on the for sale forum. The guys here look out for one an other and are always cautious about new people selling. Been some scams run. Send me the pics please and we will take it from there. If you list it for sale and I buy it, you can get a trader rating started. It is like our little feedback rating and you will soon be on board with the guys.

Thanks
Coach

 

[ikle]

I know I am new here and you guys look out for one another thats why I joined up here.I am very honest though and discribe what I sell very well.I do have a conscients unlike some people.I took some pics of the intercooler,tb and plenium,and turbo.I am not that pc savy when it comes to e-mailing pics so please bare with me.I will try to send them.If you are still interested in the intercooler you can call me at(860)350-4012 ask for kyle

thanks,ikle

 

[coach]

I have a PTE stretched intercooler,70mm Accufab throttle body and 70mm plenium with RJC power plate and a PTE GT6131bb turbo with actuator and waterline kit all have less than 100 street miles on them if interested e-mail me at vanky935@sbcglobal.net

Hey guys,
I just talked to Kyle (ikle) on the phone. He only has a few posts, but seems like a real stand up guy. Sent me his number so I could talk about the Intercooler.

Coach

 

[Quick6'n'-K.C.]

I got the pictures of your '62 OMG That thing is crazy

Very nice setup! How many cubes is it?

BW

 

[coach]

It is just a little modified... It is 412 cubes. It is a .030 409 with long rods. In the middle of changing cams. The old solid roller was a .714 lift. A little big, going with a reg solid lifter probably about .600 or so. I want more torque. I built this car when I was 25. I am now 39. Time flies.
It is 200 pounds lighter than my GN. Figure that out???

Thanks
Coach

 

[Tom Tom Turbo]

I have a stock location stretch intercooler that is water to air for sale. You'd need to buy -10 AN fittings and run your own water lines, but it would be complete with everything else, even uses your stock IC brackets! $400+shipping.


http://www.turbobuick.com/forums/pa...ocation-water-air-ic-pump-heat-exchanger.html

 

[coach]

Thanks, but I will pass. Staying away from water cooled turbos and IC.

Thank you for replying,
Coach