Radiator / Fan parts needed

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

TrAb

BOOSTIN
Joined
Dec 1, 2009
Messages
478
Hey guys i need a radiator that is in good shape, and i also need the sensor that goes on the front of the fan. Not sure what this sensor is called but it almost looks like its made out of a ceramic material. I have a picture of mine that is broken if you can see it. PM me thanks

2010-03-23100459.jpg
 
and is that screw touching the uppipe ?

when the fans are commanded that screw has 12v , looks like its in contact with the uppipe if so so it as well as anything in contact with it like alky lines or chrome maf tube... that's a short circuit waiting to happen ...all it needs is to touch a ground to complete the flow and its a dead short and there is no fuse on that wire so it could have already burned up the fusible link .
 
Yes it has touched the uppipe, so im sure it popped a fuse already. Just need to replace it i believe.
 
that pipe isnt in direct contact with any metal due to the hoses so it may not have blown , if it did its not as simple as a fuse , the fusible link is down by the starter and it would need to be cut out and a new section of fusible link installed (solder and heat shrink is prefrred but crimp on butt connectors wil do if you seal the ends of the connectors from the elements )
 
Yeah i hope it didnt do all that, problem im having is my fans are not cutting on until i turn the car off. Then the fan makes it run for the 10mins for cooldown.
 
Looking for a perfect one really. If somebody has one I've got money, just didn't wanna spend the 400 there asking for them on ebay
 
Back
Top