Ready to do an LS Swap. Need Help!

[rarperformance]

Out of all of these LS Swap kits, who has the best kit (motor mounts and oil pan)?

 

[meaclez]

brphotrods
the the mounts on had the motor in and bolted up within 10 minutes

 

[turboxan]

I started my swap a month ago, I used factory V8 clam shell mount $8 each and one inch setback plates $69 from carshop.

Do not buy the setback plates from ebay they DO NOT WORK. Bolt holes are drilled to high on plate will not line up with stock V8 mount.

I also used the Hummer pan $210.00

 

[Sharp86t6]

I would run the Holley pan.. all others hang lower than crossmember. FYI, mounts using stock style clam shells will not allow for lower ac. I learned that the hard way. Use BRP or the Spohn mounts.

 

[rarperformance]

Thanks guys! My goal is not to have a pan that sits low cause my car is lowered. And also I would like to keep my AC. It gets hot down in the south. Heres a link to my projects I'm working on, one is a 87' Turbo T and the other a 87' Monte SS.
http://www.turbobuick.com/forums/threads/building-another-t-toy.390612/
http://www.montecarloss.com/community/ubbthreads.php?ubb=showflat&Number=1001010#Post1001010

 

[Sharp86t6]

Thanks guys! My goal is not to have a pan that sits low cause my car is lowered. And also I would like to keep my AC. It gets hot down in the south. Heres a link to my projects I'm working on, one is a 87' Turbo T and the other a 87' Monte SS.
http://www.turbobuick.com/forums/threads/building-another-t-toy.390612/
http://www.montecarloss.com/community/ubbthreads.php?ubb=showflat&Number=1001010#Post1001010

Damn man... nice build!! Those wheels are so siiiickl!!

 

[rarperformance]

Sharp86t6: Thanks! I need to come up with some nice wheels for this GNX copy project. Stay tuned!