Real Terry Houston 3 1/2 Downpipes

[tbirdv6]

I have in the past,if you do a search on this board-sold many THDP w/not one problem.
With that being said I have access to approx 4 brand new THDP
stainless 3 1/2" for stock headers (for right now)

I should have them available by the 11th of this month
Price will be upwards of $595

I need to know who wants one
and
"P" or "Q" trim
If your're serious, you will have to Paypal a deposit ($100) & if you don't receive you THDP by the end of this month-I will refund your deposit(of course when ready to ship-you will be ask to pay in full)

Like all THDP's, they are a drop-in perfect fit (often imitated,not duplicated!!)

FRED
turbobuick4@yahoo.com

 

[turbot]

would they fit with the t&a headers thanks

 

[tbirdv6]

would they fit with the t&a headers thanks

Not sure, someone else would have to chime in
FRED

 

[1BADTT]

I have in the past,if you do a search on this board-sold many THDP w/not one problem.
With that being said I have access to approx 4 brand new THDP
stainless 3 1/2" for stock headers (for right now)

I should have them available by the 11th of this month
Price will be upwards of $595

I need to know who wants one
and
"P" or "Q" trim
If your're serious, you will have to Paypal a deposit ($100) & if you don't receive you THDP by the end of this month-I will refund your deposit(of course when ready to ship-you will be ask to pay in full)

Like all THDP's, they are a drop-in perfect fit (often imitated,not duplicated!!)

FRED
turbobuick4@yahoo.com

Fred,
R these THDPs alikes or genuine THDPs ?? Thought TH was in jail Let me know I got a friend who's about 2 buy a 3" & I've always wanted 2 talk him into a 3.5" . Thanks ! :biggrin:

 

[19TTA89]

Not Interested in Buying another...But I wanted to Mention that I have a Real 3.5" THDP on my car with stock headers and the fit is excellent.Really happy with mine.

 

[tbirdv6]

Fred,
R these THDPs alikes or genuine THDPs ?? Thought TH was in jail Let me know I got a friend who's about 2 buy a 3" & I've always wanted 2 talk him into a 3.5" . Thanks ! :biggrin:

These are genuine,just not made by Terry himself
FRED

 

[tbirdv6]

Not Interested in Buying another...But I wanted to Mention that I have a Real 3.5" THDP on my car with stock headers and the fit is excellent.Really happy with mine.

I had a 3" THDP & when I heard I would have no further access to these quality pipes, I purchased what I thought was the last 3 1/2", the fit was awesome,just slipped right on in w/o any clearance problems

I never thought there was much of a difference between a 3" & a 3 1/2", But WOW-what a difference a 1/2" makes, my set-up has the electric cut-out for even more fun & performance!!!
FRED

 

[SPOOLN]

How much HP and Et do you pick up? They say the original 3 THDP made it into the high 8s. Can you post any pix?
Thanks

 

[my1stgn]

I have a THDP 3" to a test pipe with dump tube. Will the THDP 3.5" work with this or do I have to get a 3.5" test pipe/dump tube to fit this? Thanks!

 

[nordy racer]

you will need a new test pipe.. or try to flair the test pipe open to a 3.5 size.. OR just don't run a open pipe.. my set up, i'm running a 3.5 system to a muffler..

 

[Nasty Wendy]

The real Terry Houstons come with a test/dump pipe.

 

[tbirdv6]

The real Terry Houstons come with a test/dump pipe.

Back in the day
So are you looking for one or just adding your 2 cents?

 

[no-nos]

nothing personal, i'm pretty sure alot of us are intrested but i just don't get why you need the $100 dollar deposit? 3.5 inch down pipes are in high demand those things will sell like hotcakes i need one too but i guess i'm just not ready to send $100 bucks to someone for something that's not gauranteed.

that being said i hope your sale goes well

 

[tbirdv6]

nothing personal, i'm pretty sure alot of us are intrested but i just don't get why you need the $100 dollar deposit? 3.5 inch down pipes are in high demand those things will sell like hotcakes i need one too but i guess i'm just not ready to send $100 bucks to someone for something that's not gauranteed.

that being said i hope your sale goes well

Its because there is only going to be 4 of of these made, and little do most people know there is a difference bewteen how a Q & P trim DP (orientation of the puck)
So I wasn't going to have the last remaining THDP turn into All P or Q trims, I was going to have this done by pre-orders

Before being scared on a deposit via Paypal,do a search on this board on THDP's & you"ll see how many DP's I've sold w/not one unhappy customer!

Also I didn't want someone tell me they want a THDP for a "Q" trim, then tell me later some hardship story that they changed their mind & the next person inline needed a "P" trim

Good luck in your quest for a excellent fitting 3 1/2" DP
FRED

 

[SPOOLN]

So is the dump pipe not included in the price or is it extra? If extra how much more and is there a deposit on that as well? Before i spend in the area of 600.00 + I want to know how much more ET and HP i am going to see, i have now an original 3 thdp..
thanks

 

[tbirdv6]

So is the dump pipe not included in the price or is it extra? If extra how much more and is there a deposit on that as well? Before i spend in the area of 600.00 + I want to know how much more ET and HP i am going to see, i have now an original 3 thdp..
thanks

No dump pipe is included, Summitt sells them as well as reducer from 3.5" to 3" so that you can use your existing dump pipe

How would someone know how much your ET or HP would increase?
Its all co-dependent of the sums of parts (bigger turbo,injectors,stall...etc) & your 60 ft times, not to mention the most important part-YOUR TUNE!!!

From my experience, is that anyone moving to a 67 or bigger would benefit-remember air in/air out
FRED

PS-Gentlemen,I'm not in desperate need to sell these,the only reason is because I keep getting emails/pm's for 3 1/2's THDP due to board members searching thru old archives of "For Sale" threads on these Pipes-there won't be anymore after this of THDP's unless used or a knock-offs

Anymore questions you can PM or Email me
Thanks for your Interests

Also,here's Jeg's part # below
555-30753 Exhaust Cutout
3-1/2''
$32.99

 

[nordy racer]

So is the dump pipe not included in the price or is it extra? If extra how much more and is there a deposit on that as well? Before i spend in the area of 600.00 + I want to know how much more ET and HP i am going to see, i have now an original 3 thdp..
thanks

it will help.. trust me

 

[Nasty Wendy]

Back in the day
So are you looking for one or just adding your 2 cents?

Well I was stating that Real Terry Houston DPs come with the dump. Being that you are stating that you are selling Real Terry Houston DPs then I would expect them to come with the dump. I am intersted but I'm also sceptical especially since it seems that your Real Terry Houstons don't come with a dump like Real Terry Houstons should.

 

[tbirdv6]

Well I was stating that Real Terry Houston DPs come with the dump. Being that you are stating that you are selling Real Terry Houston DPs then I would expect them to come with the dump. I am intersted but I'm also sceptical especially since it seems that your Real Terry Houstons don't come with a dump like Real Terry Houstons should.

Yeah,And you use to get a free car wash when you filled up w/a minumum 15 gal purchase

What's your point?

 

[Nasty Wendy]

Yeah,And you use to get a free car wash when you filled up w/a minumum 15 gal purchase

What's your point?

Well since you asked....

1. You stated in your original post that you have Access to approx 4 DPs and then state they haven't been made yet. If you are having them made why would you only have 4 made? It stands to reason that the market for these is much larger than 4 customers so why only make 4? That just doesn't make any sense.

2. With the market being void of this product there is a demand for it so why would you need to take deposits? There is no doubt that there would be buyers lined up to purchase these. BUT if you are going to take depostits why not make the deposit large enough to cover the cost of the pipe in full (to you) and then have as many pipes made as you have deposits for, then you could ship the pipes when the buyers paid the balance (your profit)? Personally I would even make a few extra.

3. Your response to me could easily be read "Buy one or STFU". That should get everyone's attention since my reply wasn't to anything YOU posted. Fact is I am looking for one but you throw up to many flags for me. Usually when someone is trying to sell you something they don't act arrogantly nor are they rude to you. I'd much rather spend my money with Jack Cotton who can and has had his son make up to 4" DPs that clear TA headers on a car with heat and AC! If anyone saw Jr's car at the Nats you know how nice that DP was. So a 3.5" would be no problem for him.

4. My point is something smells fishy about this deal therefore I am sceptical. Caveat emptor - Let the buyer beware.

You'd see more sales if you removed that huge chip on your shoulder as it is blocking your sight.