m233roller
Banned
- Joined
- Jan 25, 2002
- Messages
- 3,539
Here are some very nice parts I have had stashed away for my own use but can't keep everything so here's your chance at some damn NICE parts !!
0- Nice refurbished cat conv. hanger. End hole on C shaped piece was opened up but will still bolt up just fine.
Has all new stainless steel hardware and a super tuff strap. $75
1- Heater hard lines, glass beaded and sprayed Hi- Temp gloss black, NOT kinked, bent, rusty ect. $50
2- About the nicest used balancer Iv'e seen. $75
3- Powermaster motor off a 42,000 mile car. KNOWN GOOD. $100
4- Pair of alumimun drums, sandblasted, turned and ready to go. Painted with Hi-Temp gloss black. Plenty left for one or two more cuts depending on wear.
Do have some fins nicked up on the ends but once on the car you'd never know it. $100 for the pair.
5- Excellent set of stock exhaust manifolds. I gave them a mild port clean up as you can see in the pics. and the drivers side had the usual hairline crack right beside the factory weld, has been tig welded and done RIGHT. They are flat and all ends are nice and round and all heat shields are there. $200 and $25 to box and ship them in the lower 48.
ALL PARTS are PLUS SHIPPING and 3% fees if paypaling. Thanks Mike
0- Nice refurbished cat conv. hanger. End hole on C shaped piece was opened up but will still bolt up just fine.
Has all new stainless steel hardware and a super tuff strap. $75
1- Heater hard lines, glass beaded and sprayed Hi- Temp gloss black, NOT kinked, bent, rusty ect. $50
2- About the nicest used balancer Iv'e seen. $75
3- Powermaster motor off a 42,000 mile car. KNOWN GOOD. $100
4- Pair of alumimun drums, sandblasted, turned and ready to go. Painted with Hi-Temp gloss black. Plenty left for one or two more cuts depending on wear.
Do have some fins nicked up on the ends but once on the car you'd never know it. $100 for the pair.
5- Excellent set of stock exhaust manifolds. I gave them a mild port clean up as you can see in the pics. and the drivers side had the usual hairline crack right beside the factory weld, has been tig welded and done RIGHT. They are flat and all ends are nice and round and all heat shields are there. $200 and $25 to box and ship them in the lower 48.
ALL PARTS are PLUS SHIPPING and 3% fees if paypaling. Thanks Mike
