Removing GN Motor and transmission

[King MoneyBanks]

Have you removed the wires that are plugged into the transmission?

 

[machinegun]

where are you located? You might find a local buick guy that is willing to help and guide / apprentice you.

If you are near me you are welcome to stop by anytime

 

[BARRACUDA1968]

I just did this for the first time on GN and it wasn't too bad. I took lots of pictures during disassembly and lost all of them. 5 months went by before I started to put it back in and I was lost. Don't loose your pictures.

The wiring is no big deal, most connections will only go to one sensor or harness anyway, hard to mess that up.

Pay attention to the bolts in the front of the motor, this is where I ran in to trouble with no pictures. That got confusing but we made it through it.

Good luck!

 

[Luckydog32]

I'm getting ready to pull mine as well so I'll check back in from time to time to see your progress and may have the same questions good luck

 

[supr91tt]

I thought I had taken plenty of pictures during disassembly to puzzle it back together. Turns out the internet is full of engine compartment pictures to supplement whatever you forgot to photograph!


Posted from the TurboBuick.Com mobile app