You can type here any text you want

replacing rear cylinders

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

tl14910

New Member
Joined
Jun 11, 2006
Messages
32
how do you get the rear cylinders off of the backing plate? i dont know if mine are seized up or theres a special way todo it? thanks
 
I just went through this.....get an awl/pick and pry out on the little tangs that clip on the side. Even a small thin blade screwdriver should work. Have fun getting the new clips on.....they can be a treat.
 
Yeah, those clips can be a pain but will go in rather easily if you get a big socket or pipe that just fits inside the opening. With the clip in position, and the wheel cylinder secured in place by wedging a board or something between the back of the axle flange and the front of the wheel cylinder just give it a tap with a hammer and in it goes.
 
Back
Top