RJC Power Plate Question

[VinsGN]

I have a stock 87 GN with just the very basic bolt ons. (Exhaust/Intake/HV Oil pump/Walbro 340, ect.)

I have been contemplating purchasing a RJC Power Plate. I have performed a search and it is clear as day that the RJC power plate works and is worth the money. But my question is for a stock set up, like mine, would I need to do anything else other than bolt it on?

 

[rodman99999]

RJC Powerplate

Other than going to the hardware store and finding bolts that are about 6mm longer than the stock ones: NOPE! You will either be able to turn your boost up, or turn your fuel pressure down, because the two cylinders(5 and 6) that usually knock first, will be running a tad richer(much more balanced air flow). Either one will give you a slight increase in power. No muss, no fuss, no downside.

 

[idaho gn]

i didnt need longer bolts i used the stock ones

 

[rodman99999]

stock bolts

Then you've got just barely enough thread in the manifold for a correct torque reading(IF you used the gaskets). Unless your stock bolts were longer than mine(25mm). PS: Congrats on the NICE TIME!!