roller rocker adjustment procedure

[workingdan]

I just got a set of T&D roller rockers and was wondering what is the best procedure for adjusting them. They are on stock heads.
Thanks

 

[jasjamz]

Zero lash then a quarter turn. Set them hot. Make sure the valve is closed.

 

[whitehot1]

I just got a set of T&D roller rockers and was wondering what is the best procedure for adjusting them. They are on stock heads.
Thanks

I use the procedure of post #5 in this thread to do my adjustments of the T & D roller rockers and it's quick and easy,i highly recommend it for anyone. :smile:

http://www.turbobuick.com/forums/general-turbo-buick-tech/237224-preload-w-tds.html

 

[turbofabricator]

You will NEED to grind the sides of the rocker pedistals to use them on stock cylinder heads, and use .100" shorter push rods. Then on the base circle of the cam, adjust the rocker to zero lash plus one half turn, then lock it down. It's alot easier to talk you through it then write it out. If you can't figure it out, PM me for my number and I can talk you though it.

 

[workingdan]

Used whitehot1's post and it worked out great. Thanks guys