I have a set of main caps that are machined for a RJC block girdle. Caps 1 & 4 are stock caps modded for a girdle while caps 2 & 3 are billet caps machined for a girdle. Cap 4 does have the spacers welded to the cap and are properly machined. These caps will save a good amount of machine work when installing a girdle which will save you some money. $185 plus shipping for all 4 caps. Please add 3% or send as a gift if using paypal. Thanks
Set of main caps machined for RJC block girdle, 2&3 are billet caps
- Thread starter Steve
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
ek02
Well-Known Member
- Joined
- Jan 31, 2008
- Messages
- 1,226
Have the billet caps ever been installed and machined to fit the registers of a block, or where they new when the tops were machined off and never fitted to a block?
I have had a few questions about this. The caps were used on a motor for a short time before going to a stage motor.
Similar threads
