Sheet metal oil pan

[TurboDetroit]

Hey guys I'm looking at sheet metal deeper oil pans. Anybody wearing one of the vendors 20 bolts sheet metal pans? If so, which one and how does it fit?!

PICTURES WELCOMED!!


Sent from my iPhone using Tapatalk

 

[SHADOWII]

Have the RJC-no problems, about 10 yrs old.

 

[84BuickGNYorkPA]

RJC pan, girdle and crank scraper here, no problems.

Chuck

 

[1KWIKSIX]

RJC Deep Pan here too!
Entire pan (inside and out) got glass bead blasted to remove the gold coloured zinc plating that's been reported to flake off. Had the outside black powder coated. Has been on for over 4 years now.

Fits great- no problems, still looks brand new, (did have to clearance the oil pump pick up though).
Haven't ground out the pan (yet).....actually doesn't hang down too low. My Hughes Deep Transmission Pan hangs down much lower!
Still looks new.

Over all A1, just like all of RJC's stuff!

 

[drturbo69]

message sent

 

[TurboDetroit]

Anybody running this one from gbodyparts? http://www.gbodyparts.com/product_info.php?products_id=826

Sent from my iPhone using Tapatalk

 

[TurboDetroit]

Sent from my iPhone using Tapatalk

 

[TurboDetroit]

message sent

If this was intended for me I never received it...


Sent from my iPhone using Tapatalk

 

[drturbo69]

Sent conversation message about powder coated black 10 qt. hamburger brand oil pan with scraper for stock stroke.Will send again.

 

[gunzandgearz]

Hey turbo Detroit let me know if you or someone you know installs this pan and everything turns out ok a side kickout pan can be worth up to 20 horsepower at higher revs.

 

[drturbo69]

Hey turbo Detroit let me know if you or someone you know installs this pan and everything turns out ok a side kickout pan can be worth up to 20 horsepower at higher revs.

still got the pan.

 

[V6sleeper]

Anybody running this one from gbodyparts? http://www.gbodyparts.com/product_info.php?products_id=826

Sent from my iPhone using Tapatalk

That's a lot of coin

 

[drturbo69]

That's a lot of coin

Got a billet fabrication on mine-more money but better pan.