SMC Question

[87LimitedT]

I just got an older SMC alky kit and have it all hooked up except the clear line tubbing that comes from the controller do i T that into the line i have going into the boost gauge?

 

[notacarlo]

Ideally closer to the manifold, but yes it needs a vac/boost reference.

 

[rmar]

Ideally closer to the manifold, but yes it needs a vac/boost reference.

x2
But it will work under dash........

 

[87LimitedT]

Thanks guys just wanted to make sure before i started cutting stuff i didnt need to.

 

[Roc87]

Be sure to ziptie that hose onto what ever source you find, when I ran the SMC that clear tube kept coming off the tee.

 

[coach]

Be sure to ziptie that hose onto what ever source you find, when I ran the SMC that clear tube kept coming off the tee.

I super glued mine. Popped off once before I did it, and never again.

Thanks
Coach

 

[Quick6'n'-K.C.]

I super glued it AND zip tied it. It was easier hooking it up under the dash, make sure you leave enough room so it does not get tugged on and pulled out.

BW