Buick Aluminum stage II 14 bolt cylinder heads casting #25500031 Fresh from machine shop. Featuring bronze guides, 2.080 titanium intake valves and 1.600 stainless steel exhaust valves both have 11/32 stems. Currently set up for a .660 lift solid roller cam, 10* locks and PC seals. Fully ported and polished, 49 cc combustion chamber size, not sure on intake and exhaust runner sizes but they are BIG. No leaks, cracks, or holes, no repairs have ever been done. These are an 'abuse free' set of heads.------$1600 as is or $1800 with a set of used T&D roller rockers
On Center stage II intake by Edlebrock, ported, temp sensor, Ford TPS sensor, Accufab 90mm TB Chrome, Doghouse, CSI Aluminum thermostat housing, Aluminum SX fuel adjustable fuel pressure regulator w/liquid filled pressure gauge, fuel rails w/fittings for fuel lines, -8 steel braided fuel rail jumper line, manifold temp sensor all included.------$1100.
Complete set of 4 bolt steel main caps for 4.1 stage II block crossdrilled as well.-------$350.
14 bolt aluminum oil pan damaged but repairable.-----$225
Custom built 4 bolt Dual scroll turbo 3.5" outlet/4"inlet equivilent to a size of a PT76-78 Big shaft, hits hard and fast and pulls mid/top like a pack of mules. Came off of a blown engine, seems tight but I would send it to John Craig for proper assurance before bolting it on. Cost $2200 new---------$800. as is.
Set of 83lb Sieman injectors used.-----$325.
Used Applied Techs waste gate, great condition.-----$200.
I have described all parts to the best of my abilities/knowledge I have pics and will send upon request via e-mail. Flat rate shipping charged and shipped to anywhere in lower 48 states.
Looking for fast sales
On Center stage II intake by Edlebrock, ported, temp sensor, Ford TPS sensor, Accufab 90mm TB Chrome, Doghouse, CSI Aluminum thermostat housing, Aluminum SX fuel adjustable fuel pressure regulator w/liquid filled pressure gauge, fuel rails w/fittings for fuel lines, -8 steel braided fuel rail jumper line, manifold temp sensor all included.------$1100.
Complete set of 4 bolt steel main caps for 4.1 stage II block crossdrilled as well.-------$350.
14 bolt aluminum oil pan damaged but repairable.-----$225
Custom built 4 bolt Dual scroll turbo 3.5" outlet/4"inlet equivilent to a size of a PT76-78 Big shaft, hits hard and fast and pulls mid/top like a pack of mules. Came off of a blown engine, seems tight but I would send it to John Craig for proper assurance before bolting it on. Cost $2200 new---------$800. as is.
Set of 83lb Sieman injectors used.-----$325.
Used Applied Techs waste gate, great condition.-----$200.
I have described all parts to the best of my abilities/knowledge I have pics and will send upon request via e-mail. Flat rate shipping charged and shipped to anywhere in lower 48 states.
Looking for fast sales
