Stock Crank Pulley

[Rayk]

The Regal I just bought has an underdrive crank Pulley which I want to return to stock. I need all the cooling help I can get here in Central Florida driving around town with the A/C blasting in 97 degree weather. If someone has a factory pulley they can sell me that will accept my intercooler fan I'd appreciate it.

 

[626gn]

I may have a factory pulley in storage. I'll check and send you a pic later today or tomorrow.

 

[N2BUICK]

What all do you need? I have that large crank hub, the belt pulley, and the intercooler fan mount hub. Probably have the plastic fan also

 

[Rayk]

What all do you need? I have that large crank hub, the belt pulley, and the intercooler fan mount hub. Probably have the plastic fan alsoView attachment 399982View attachment 399983

I think I need it all but, I'm confused by the 6 bolts on the outside edge of the pulley? What attaches to them? I could get a better idea of the stock setup if I could see how it looks on a GN or TType. My Setup has the stock intercooler fan but, I can't tell if the fan hub is stock or comes with the underdrive pulley.

 

[N2BUICK]

I would bet your current fan hub goes with the under drive hub. The six bolts hold the belt ring on the hub.

 

[TurboWh1]

The IC fan attaches to the pulley using 3 of the 6 bolts