Stroker Kits

[J-B Racing]

Who makes good Stroker Kits for the 109 Blocks...

Thanks

 

[V6RACER]

Call Dan at DLS or Mike at Full Throttle..

 

[J-B Racing]

Call Dan at DLS or Mike at Full Throttle..

I was told that they are two different kits. ( Suppliers )

Who's is better..

 

[Underboost]

Hartline

 

[V6RACER]

Call both and make your decision. I went with DLS and I am pleased.

 

[J-B Racing]

Call both and make your decision. I went with DLS and I am pleased.

Thanks Jason

 

[Boost231]

FULL THROTTLE SPEED - Store Front Page

 

[DR BOOST]

dls....his kits are ready to drop in. no extra machining or balancing needed.
bearings also are fitted for the crank.

dan is the man

 

[J-B Racing]

dls....his kits are ready to drop in. no extra machining or balancing needed.
bearings also are fitted for the crank.

dan is the man

Any idea the cost on that..

 

[KevinB]

Call both and make your decision. I went with DLS and I am pleased.

Hey, you said you were de-stroked:tongue:

 

[cpac]

Go With Dls

 

[2swoosh]

anyone knows the ballpark cost of the stroker installed?

 

[V6RACER]

Hey, you said you were de-stroked:tongue:

Yep

 

[cpac]

CONTACT DAN AT DLS,,he will give you a price ,and some good advice on your buildup check out his custum ALU. oil pans for your stroker ,they are a work of art. DAN is not a salesperson ,he is a engine builder, for those of you that do not know of DAN STREZO

 

[GN87Mike]

I used Weber Racing's stroker. The kit was of good quality and was a drop in when I up graded last year.

 

[turbo nasty]

Hartline Has a stroker recip kit.

Crank, rods, pistons all forged, bearings chamfered, B'd & B'd/Ready to rock...Bolts and all. For about $2800.00.
As ar as final install and machining that will be according to the shop that does it.

 

[V6gofast]

Any idea the cost on that..

Why don't you give me a call and we can discuss what you are looking for.
There are several different ways to do the kits .

 

[S2V6RACER]

CONTACT DAN AT DLS,,he will give you a price ,and some good advice on your buildup check out his custum ALU. oil pans for your stroker ,they are a work of art. DAN is not a salesperson ,he is a engine builder, for those of you that do not know of DAN STREZO

I have seen this DLS kick out pan. It is indeed a work of art.

 

[J-B Racing]

Thanks guys for all your help.


Joe