stroker motor

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
looking for stroker motor; new or good used? Located CA
Robert(psiedv6 on this board) has a few stroker engines for sale right now. He is in Riverside and is a great guy to deal with. I have one of his strokers in my car and could not be happier. I would pm him. He also has many other parts you may need
 
Here is a fresh engine with a 3.625" forged crank, forged rods, pistons and 2 steel center caps. It also has a billet roller cam, well-ported TA SE heads and numerous other good parts.

It is a 272 cu. in. build that will run high 9's at 18 psi with the proper supporting items! :)

4.JPG
 
What is price on theses strokers"".."?
Wide open question. If you want to use most of your supporting parts you already have, you will spend anywhere from $6500 to 8500. If you choose to add the pieces that will get you the peak power output it can make ( better turbo, downpipe, ported heads, etc)...then your talking $9000-20,000.
Ask me how I know...

Coach
 
Wide open question. If you want to use most of your supporting parts you already have, you will spend anywhere from $6500 to 8500. If you choose to add the pieces that will get you the peak power output it can make ( better turbo, downpipe, ported heads, etc)...then your talking $9000-20,000.
Ask me how I know...

Coach

That's right! ;)
 
Iv'e seen the motor nick listed for sale. Damn is it nice
 
Back
Top