T&D Roller Rockers

[gnxtc2]

One set of GN-1 T&D Roller Rocker, 1.65 ratio. The rockers were slightly back cut to clear double valve springs. Good condition. Will also include 3 extra shims to align rockers with valve tips.

Figure around 15lbs for shipping from 07024

$250 plus shipping

Please respond to my e-mail. Pic available upon request.

Thank you

Billy T.
gnxtc2@aol.com

 

[Hot Air]

send pics to "alphaenvirmgt@vnet.net"
Conrad

 

[broke1]

Email bounced back...please send mail to drew2312000@yahoo.com

 

[TURBOGTA1]

INTERESTED, SEND PICTURES TO TURBOGTA@AOL.COM

 

[gnxtc2]

Sorry guys, my correct e-mail address is:

gnxtc2@aol.com

Contacting an administrator to edit one's posting is a turn off.

 

[gmgearhead]

will they fit stock heads?

 

[gnxtc2]

will they fit stock heads?

The rockers were on 8 bolt GN-1s. I know that the heads either accepted stock rocker set up or one could upgrade to the T&Ds.

Billy T.
gnxtc2@aol.com

 

[motomafia]

send pics motomafia@hotmail.com still work with single spring?

 

[gnxtc2]

For the guys that are asking me if these will fit iron heads, the answer is yes but.....

Spoke with Tom at Champion and he said they will bolt up but the spacing between the rockers will need to be adjusted. The rockers are set up for GN-1s valve stem spacing. If someone wants to put these rockers on an iron head, they need to shim/cut the spacer between each individual rocker.

If nobody wants them, they will be put on E-bay by the end of the week.

Thank you

Billy T.
gnxtc2@aol.com

 

[67turboCamaro]

PM sent

 

[hwfstru]

If you still have the rockers shoot me a line I am interested and need a set soon.

bradywitt@comcast.net

Thanks

 

[PhilM]

Hello, shoot some pics to:

spoolinup@gmail.com

PhilM