slimtastic
yea dude...I rock
- Joined
- Aug 9, 2002
TA-49 turbo. bought it about a year ago and never ran it. did take it apart to inspect it though....and in the process broke two turbine housing bolts. theres a little shaft play and the unit is fully rebuildable as the compressor is no where near hitting the compressor housing. at this point id recommend a new turbine housing. 200% obo plus shipping
valvesprings comp 26918 set of 12 125lbs at the seat. beehive style .625 lift. only 200 miles (if that) 50$ plus shipping obo. they came in a comp cams hyd. roller kit for grand nationals.
fuelpump hanger built to house a pair of walbro 255 lph pumps or aeromotive stealth 340's. note sure about the wiring, and the stock bulkhead connector is gone. but the feed line is 1/2 inch in diameter and it has a workingfuel level. just need some wiring magic and a pair of fuel pumps 70$ plus shipping obo
heads fresh out of the machine shop with a .020 deck/3 angle valvejob/ new comp 980's installed/ has ferra 6000 series 1.77 valves/ cleared for .535 lift 350$ shipped
titanium retainers/ 10 degree locks required 50$ plus shipping
![357jayv.jpg](/proxy.php?image=http%3A%2F%2Fi44.tinypic.com%2F357jayv.jpg&hash=a4f7862f2b3f55fd1d072ce72079ce93)
![9vh7uo.jpg](/proxy.php?image=http%3A%2F%2Fi41.tinypic.com%2F9vh7uo.jpg&hash=ff7604e6e44f08ccf216694add0feaff)
![5f3fqo.jpg](/proxy.php?image=http%3A%2F%2Fi39.tinypic.com%2F5f3fqo.jpg&hash=b7c9bb8bc89c6cd7842aebc5d2fd79ee)
![34iffv4.jpg](/proxy.php?image=http%3A%2F%2Fi43.tinypic.com%2F34iffv4.jpg&hash=06ab12a8ec4bd2e364fa8777e668a56f)
valvesprings comp 26918 set of 12 125lbs at the seat. beehive style .625 lift. only 200 miles (if that) 50$ plus shipping obo. they came in a comp cams hyd. roller kit for grand nationals.
![2eb8tae.jpg](/proxy.php?image=http%3A%2F%2Fi39.tinypic.com%2F2eb8tae.jpg&hash=d8a2a90e4d3bdf573c0cbb24ac829b5c)
![332w65z.jpg](/proxy.php?image=http%3A%2F%2Fi41.tinypic.com%2F332w65z.jpg&hash=d60b0d7f3049e82d9d4da8fe6e77794f)
fuelpump hanger built to house a pair of walbro 255 lph pumps or aeromotive stealth 340's. note sure about the wiring, and the stock bulkhead connector is gone. but the feed line is 1/2 inch in diameter and it has a workingfuel level. just need some wiring magic and a pair of fuel pumps 70$ plus shipping obo
![eitcsy.jpg](/proxy.php?image=http%3A%2F%2Fi41.tinypic.com%2Feitcsy.jpg&hash=b90027db88c2800b65ca3dcb9976f683)
![mljcs5.jpg](/proxy.php?image=http%3A%2F%2Fi43.tinypic.com%2Fmljcs5.jpg&hash=265a8f50f812c99885621396eaa176fd)
![24eopcj.jpg](/proxy.php?image=http%3A%2F%2Fi44.tinypic.com%2F24eopcj.jpg&hash=23da6ddf633e93f7a8b238aeadf987f3)
heads fresh out of the machine shop with a .020 deck/3 angle valvejob/ new comp 980's installed/ has ferra 6000 series 1.77 valves/ cleared for .535 lift 350$ shipped
![rc32w6.jpg](/proxy.php?image=http%3A%2F%2Fi41.tinypic.com%2Frc32w6.jpg&hash=346b50cd19ee5395f9cec949f21ecb36)
![e34lv.jpg](/proxy.php?image=http%3A%2F%2Fi39.tinypic.com%2Fe34lv.jpg&hash=d51178801ed1096b1fdcd43c5a18f3ea)
titanium retainers/ 10 degree locks required 50$ plus shipping
![ypd80.jpg](/proxy.php?image=http%3A%2F%2Fi39.tinypic.com%2Fypd80.jpg&hash=1124f4a5ba5e365b53708b519e1e18d6)