87grandnational
Member
- Joined
- May 29, 2004
- Messages
- 313
Theres a block that can support up to 3000hp
! Its from
www.taperformance.com also it weighs less than 100lbs, 3.8-4.0 bore size. Can use most of the stock 109 block parts. And is ALL ALUMINUM. It take 8 or 14 blot heads with no modification. Plus it has improved oil passages.
Some of the things it has.
- Alvailable in On or Off center.
- Compatable with most stock parts.
- Fits ALL GM Transmissions.
- Thick Steel Sleeves for strength up to 4.000 over bore.
- Takes Stock Crank (3.400) Or up to a 3.625.
- Knock senser provision.
- Manual Tranny Aceptable
This is just a few things.. This engine is BEATIFUL! Its $3,900.00
And to me it is WORTH it. Plus they have Ported Polished and fully built race heads with your choice of cam set up. and 125lb valve springs. And 1.65 Forged Roller rockers! The Heads are $2,550.00 a set. Not too bad for a high performance head.
For all you S2 guys, Incase you throw a rod thru your block. Check this guy out This thing is beatiful!
Heres the link for the block.
http://www.taperformance.com/v6_block_flyer.htm
Enjoy
- Cody

www.taperformance.com also it weighs less than 100lbs, 3.8-4.0 bore size. Can use most of the stock 109 block parts. And is ALL ALUMINUM. It take 8 or 14 blot heads with no modification. Plus it has improved oil passages.
Some of the things it has.
- Alvailable in On or Off center.
- Compatable with most stock parts.
- Fits ALL GM Transmissions.
- Thick Steel Sleeves for strength up to 4.000 over bore.
- Takes Stock Crank (3.400) Or up to a 3.625.
- Knock senser provision.
- Manual Tranny Aceptable
This is just a few things.. This engine is BEATIFUL! Its $3,900.00
And to me it is WORTH it. Plus they have Ported Polished and fully built race heads with your choice of cam set up. and 125lb valve springs. And 1.65 Forged Roller rockers! The Heads are $2,550.00 a set. Not too bad for a high performance head.
For all you S2 guys, Incase you throw a rod thru your block. Check this guy out This thing is beatiful!
Heres the link for the block.
http://www.taperformance.com/v6_block_flyer.htm
Enjoy
- Cody