Take It All

[tom robison]

--------------------------------------------------------------------------------

I have decided to sell my car and all of my parts for one price. This is only a quick run down of what you get .

87 Gn with 133,000. The motor has new bearings and gaskets through out about 4 months ago.The car has a 45a turbo, extreme automatic trans w/ trans brake,Vigalante converter, moser axles w/ auburn carrier,Maft pro w, 60lbs injectors,atr external gated downpipe w/ 2.5 atr exhaust,f body radiator, new mickey thompson drag radials.

The body is in good shape with no real rust issues, there are a few small spots ont he doors.There has been a new piece of driver floor installed.The interior is in exellent shape. There was a roll bar in the car at one point wich was cut out and could be put back in very easy.The pain does have some nicks and scratches and was painted about 15 years ago.

Here is a quick run down of the parts
Full rust free qtr panels
2 sets of fenders
3 sets of doors all in good shape
Tons of grey interior pieces also sone burgandy and blue
GN seats in great shape
Few center consoles gn and t type
box of dash bezels
t tops
Complete intake
Motor brackets
Fuel rails
power steering parts,
few sets of qtr glass
Tailights
inner wheel wells
exterior trim
sets of 20 and 30 over pistons on rods
Boxes of misc bolt ,pulleys, balancers and brackets
Stock short block forn car still good, home ported heads, ported intake
Parts to build a 40 over girdled short block.

There is to much to list, I want it all to go at one time, i do not have time to part out , so don't ask

First 10,000.00 takes it all.

Call for more info 513-218-4764. thanks Tom Robison
I will get pics soon

 

[charlief1]

I sent a PM to notacarlo for you Tom. Good luck.

 

[tom robison]

thanks

 

[notacarlo]

Looks like an incredible deal Tom, I was browsing this earlier.

I really need to dump the SVO before I take on another TR. I will keep an eye on this listing as it is very attractive to me.

Thanks for the heads up Charlie!!

Back to the top!

 

[tom robison]

Low mileage used engine for sale, Inspected new gaskets, rear main seal, leaks down good, detailed & ready to install. This would be a good opportunity to build a clone or buy a rolling chassis to fix up. $ 2,800.00 with no core. pictures available upon request.

Next ! 040 over fresh short block, steel main caps 010/010 ion nitrate crank for durability. TRW coated pistons. Erson cam, high capacity modified front cover & oil pump, balanced. moly sealed power rings. cloyes chain, bore, hone with torque plate etc. ready for a nice set of heads to complete a nice low 11 or hi ten second package. $4,000.00

Bare new stage II head Pt. Num. 25500031 $225.00



Next ! 109 blocks, cranks, engine cores, intakes call for price & availability. Everyone here knows my reputation for being fair & honest,So buy with confidence. 949-378-1590 Lou

Why are you posting this in my thread?

 

[notacarlo]

Lou, does this have anything to do with the OP's sale?

 

[KevinB]

Can I get pics of every piece from every possible angle?












Just joking! Anyways, this is a great deal for someone. His basement is stuffed full from all these parts. Someone will need a u-haul to get everything.

 

[tom robison]

Can I get pics of every piece from every possible angle?












Just joking! Anyways, this is a great deal for someone. His basement is stuffed full from all these parts. Someone will need a u-haul to get everything.

Yes, you will need a u-haul. I am going to work on some pics in the morning

 

[tom robison]

here are some pics.
Pictures by tomrobison - Photobucket

 

[tom robison]

all calls and pm's returned. thanks for the interest

 

[tom robison]

ttt

 

[tom robison]

car is sold! all parts are still forsale.

 

[rede4christ]

Tom going to edgewater tonite if so will see you there.

 

[Whut]

Where were you six years ago when I paid 10K for the pile of crap GN I ended up with. Its now a very nice and quick GN but crap, I could have had a great head start if I just found something like this!

Good luck with the sale!

 

[charlief1]

Wondering who bought it Tom. Can you tell us or will it make someone mad?

 

[JOHNDEEREGN]

Wondering who bought it Tom. Can you tell us or will it make someone mad?

He is on the board, go to cars for sale.

 

[charlief1]

Got your PM Ty. Thanks for the info. Send it on to Dan and see if he can get it.

 

[JOHNDEEREGN]

got your PM Ty. thanks for the info. Send it on to Dan and see if he can get it.

Read my response,

 

[JOHNDEEREGN]

http://www.turbobuick.com/forums/cars-sale/323997-87-gn-many-mods-consider-trades.html

 

[Whut]

Ok, if the parts are still for sale, how much for a drivers side seat butt. Mine has a broken bolster that has poked a hole in one side and even as careful as I am getting in and out it is still getting bigger. I would really like to replace it so shoot me a price if you still have one, thanks.