te-60 exhaust housing

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

QUIP'6'

Brian Roman
Joined
Nov 26, 2003
Messages
4,381
i am looking for a te60 exhaust housing the one i purchased was ported wrong and my puck is not sealing the hole it is leaving a quarter moon shape uncovered and i am getting different boost readings with every full throttle attempt. i am in the middle of rebuilding this turbo as the exhaust wheel is damaged on the outer diameter of it. didnt notice till the housing was removed. the turbo spooled and ran great to my surprise. it is a garrett housing. i dont know if other housings will work.
 
TE 60 housing

I have a Turbonetics exhaust housing if you are still interested. i've got a picture of it at work. I can send it to you tomorrow.
Doug
 
I have a Turbonetics exhaust housing if you are still interested. i've got a picture of it at work. I can send it to you tomorrow.
Doug
i would rather have a garrett but thanks i dont like the turbonetics because they are heavy and have that ugly plug thing on the end of it. thanks anyways
 
How much you want to spend?

hey i replied the other post that i have a friend that got a te44 parts turbo and i can probably get the housing and wheel off of him but if it falls thru i would take yours if it is still available. hows 100 shipped if the other falls thru?
 
How about a complete TE-60??? Just pulled the turbo off my car worked great!!! Polished on the intake side with a .63 garrett exhaust housing!!!
 
hey i replied the other post that i have a friend that got a te44 parts turbo and i can probably get the housing and wheel off of him but if it falls thru i would take yours if it is still available. hows 100 shipped if the other falls thru?

What your zip? I need to check the shipping $$$$ but it should not be an issue. $100 shipped just for the exhaust housing right?
 
What your zip? I need to check the shipping $$$$ but it should not be an issue. $100 shipped just for the exhaust housing right?

my zip is 15061 and yes just for the housing. thank you very much. i will let you know if my other deal falls thru or not. thanks again for your time
 
How about a complete TE-60??? Just pulled the turbo off my car worked great!!! Polished on the intake side with a .63 garrett exhaust housing!!!

no thanks sound tempting but i have a s cover one that just needs a exhaust wheel that i got for free. still works great just the outer part of the wheel is gone didnt know till i tore it apart. as for the exhaust housing it is over ported and my puck doesnt cover it all the way 1/8 moon shape is not covered because the thdp i got is off a bit. thanks again
 
Back
Top