TE62 variant?

[Brooks]

Some of you may have seen the new turbo wheel page on gnttype.org. I'm trying to make sure that it stays updated as I hear about new turbos or find part numbers, measurements, etc. for the existing wheels on the page.

Somebody recently brought to my attention that there is a TE-62"E" available as well as the TE-62. The "E" version possibly has a slightly smaller compressor than the usual TE-62 but the same P-Trim turbine wheel.

Are any of you guys familiar with this turbo? If so, can you provide any input? Feel free to email me if you prefer not to post to the board.

Charles Brooks

 

[Donald McMullin]

I do not have any information about the TE62E, but I did want to thank you for developing the table you posted on gnttype.

Good information.

Donald McMullin

 

[1of1547]

I also wanted to thank you on the wheel page. I have been looking for a long time for this information.

 

[TurboBob]

TE62E: P trim turbine wheel, TE44 type compressor wheel. Spools well, a friend has one. Garrett turbine housing since it was bought before PTE began making housings.

No track times yet.

TB

 

[Brooks]

Thanks guys

Bob, thanks for the info. I'll make the addition and submit it to Ken later.

Charles Brooks