Keep in mind these seals are not a direct replacement, you will need to make the Throttle body seal hole just slightly larger since the seals are slightly larger.
I know since the 1st one I ordered I though it was a direct replacement to which it will fit if you forcefully fit it, and then did a vacuum check and it was leaking around the Throttle Body seals.
The 2nd pair I ordered I used an Dremel tool with a Dremel 120 grit sanding band, and lightly going around the Throttle body seal area.
After a few light sanding I would check the seal area diameter using the seals itself for snug fit, no vacuum leaks.
There was a web site who does work and repairs Throttle Bodies, but I just found out that web site is for sale.