To those that have deleted there AC Help me???

[boost86]

I have a ?. Since I got rid of my AC and Heater what do you guys do with the outlet on the intake and the intake on the water pump. Do you just loop them together ?? And if that is the way to do it do you just buy a 90* fitting and some hose to run down to the water pump.

Thanks in advance

 

[Topjimmy]

A good parts store will have a screw in brass block-off to replace the tubing adapter at the intake. They can also hook you up with a rubber block-off (similar to the nipple used to bypass the oil breather hose at the stock turbo inlet). Just clamp it to the timing cover hose outlet.

HTH - Jimmy

 

[yullose]

I used a rubber "cap" on the pump, and a pipe plug in the intake.
The rubber cap looks like an overgrown vacuum cap. It comes packaged as an assortment in the "HELP" line of products. I found mine at Auto Zone.

 

[Dwayne]

On the waterpump, I drilled and tapped the oulet for 3/8" npt and used a brass plug with liquid teflon to fill the hole.