TR6 Troublecode Reading?

[greeneyegi]

been finally putting miles on car and was messing with the IAC settings through XFI. I shut oft and now no spark.
Put in different tune and nothing.
I found screw fell out of cam sensor. Replaced and tested no good.
TR6 I believe is coding, but don't know how to read the code, and search is down.
TR6-Tried to start, all 3 leds fire except for run, then i get a red light for a second then pause and red light blinks 8 times then repeats on the tr6.
The xfi leds i get green power/crank goes red solid/cam orange solid/points flicker during start, any help would be appreciated. I really think its something in the XFI I fd with.

 

[mikes86ttop]

From the manual... Hope this helps?... Mike

 

[mikes86ttop]

So that'd be code #18 your getting...

 

[greeneyegi]

So that'd be code #18 your getting...

Yes that’s what I got out of it, hmm I’ve got Casper’s engine wiring kit with tr6.
Weird all the sudden .
I checked ccci fuse 25a, it’s good.
Never saw the coil Hotwire thing before. Guess I’ll get to trying that.

 

[mikes86ttop]

Check your tr6 box where the harness bolts in.... that brass threaded insert can pull out just enough to wreak havoc!!!!

 

[mikes86ttop]

My insert actually came out totally, ... I ended up cleaning up the hole and re-gluing the insert back in with some super super glue that's been holding up for a couple years now.