EightSecV6
MDBL
- Joined
- Jul 18, 2001
-IMPORT 3.625 steel crank cut .010/.010 (to make it true), magged and polished
-Carrillo 6.5" rods with Carr bolts (recessed bolt holes to clear block)
-Arias hard coated pistons with buttons (much lighter) 3.830 10.8:1 compression with a .040 gasket and a 46cc head.
The entire assembly is balanced internally and has 6 passes on it (i think), and EVERYTHING was brand new prior to that.The compression is too high for a street engine if you are considering it.
$1700 shipped for everything in the lower 48, I have double that in it!
-Carrillo 6.5" rods with Carr bolts (recessed bolt holes to clear block)
-Arias hard coated pistons with buttons (much lighter) 3.830 10.8:1 compression with a .040 gasket and a 46cc head.
The entire assembly is balanced internally and has 6 passes on it (i think), and EVERYTHING was brand new prior to that.The compression is too high for a street engine if you are considering it.
$1700 shipped for everything in the lower 48, I have double that in it!