Tunnel Ram Intake

[CHANCE]

Did the ever make a tunnel ram for the off center block? I so I'd like to get my hands on one.

 

[rag231]

Yes , mine was originally off center and you can see where the intake was cut in half and welded back together. Keep searching, they do pop up from time to time. I was actually told to sell it and invest my money in a regular carb intake. I like the look and I think it functions well enough at my current power level.

 

[CHANCE]

Still looking for a tunnel ram

 

[turbofabricator]

I can fabricate one for you IF you really want one. Save up for it, though.

 

[CHANCE]

I can fabricate one for you IF you really want one. Save up for it, though.

How much we talkin? I just got back from the sand box and have some spare change laying around.
Also have you done one before? and if so can I get pictures of it?

 

[daves87gn]

are you looking for production heads or stage heads, i got one for stage heads if interested.

 

[CHANCE]

What's the difference between the two? Is it the port location? Or the intake to head angle?

 

[daves87gn]

port location

 

[CHANCE]

Isn't there a thread on making an on center work on an off center block

 

[CHANCE]

are you looking for production heads or stage heads, i got one for stage heads if interested.

Can you get me pictures and a price?

 

[daves87gn]

Can you get me pictures and a price?

no problem,will have them for you on monday, and FYI all stage tunnel rams were made off center, and could be ported to fit on center

 

[CHANCE]

So if It's off center can't it just bolt up to a stock block and heads? Also do they make stage heads that will work with that tunnel ram that will bolt to a stock block?

 

[TurboDave]

So if It's off center can't it just bolt up to a stock block and heads?

production heads and stage II heads have NO interchangeable parts. Doesn't matter whether you're talking about on center or off center. What fits productioin heads will NOT fit Stage II heads, and vice-versa.

 

[Nick Micale]

Check with TA Performance as they have a few M&A tuned port intakes and accessories that were made years ago for a production style block and heads.

As I recall, they have different length runners available for tuning max HP at different RPM ranges?

 

[CHANCE]

I thought that it would bolt on, and the only thing was the ports didn't line up.

 

[CHANCE]

Check with TA Performance as they have a few M&A tuned port intakes and accessories that were made years ago for a production style block and heads.
As I recall, they have different length runners available for tuning max HP at different RPM ranges?

Nick I looked on their web site and didn't see anything can you point me in the right direction?

 

[daves87gn]

http://www.turbobuick.com/forums/threads/cas-sheetmetal-intake-sell-or-trade.376031/

here you go tunnel ram for production heads, and Nick is a good guy

 

[Nick Micale]

Nick I looked on their web site and didn't see anything can you point me in the right direction?

Talk with Mike at 480-922-6807.

 

[turbofabricator]

Ok, why do you want a tunnel ram? The factory manifold is a tunnel ram of sorts. The factory intake is not a performance killer. A ported stock intake will support over 750 horsepower. By the way thanks for your service.

 

[CHANCE]

Just for the WOW! factor thats all really.