imjoesnuffy
I just break stuff!
- Joined
- Sep 13, 2005
109 Block std bore, will need to be bored 10 or 20 over, due to ridge cap at the top of the cylinder. Hot tanked and magnafluxed, all checked out. Has the fitting for the turbo drain already in place. Sitting for a year now collecting cobwebs. $250 picked up or $350 shipped in the continental US.
2 NA STD/STD cranks $50 or 85 shipped each in the US.
Stock tensioner $50 or $65 shipped.
Stock ECM modified to work with powerlogger, ECM only no chips. I was chasing down a problem and picked this up, the ECM did not solve what I was chasing, turned out to be something else. $55 shipped, no chips included.
NA 20 bolt oil pans $20 or $35 shipped. Does not have the baffle welded in for the turbo cars, but you can get the template (gnttype.org) and weld in your own.
TurboTweak v. 6.0 chip for Street gas and Alky, 60# injectors. $105 new, $55 shipped. I have ran as fast as 10.40 at 132 with this chip. It is fantastic.
Steering column guard with lock $60 shipped.
Remanufactured stock MAF. Works fine and does peg out at 255, $50 shipped. Took me 3 tries to find this one that worked.
Stock throttle body $45 shipped.
Stock upper plenum $35 shipped. Minor port work inside and powdercoated black, accept for the lines on top are stock/silver looking.
Engine stand transmission fixture. Allows you to work on your transmission on your engine stand instead of using a bench mount fixture. $80 plus shipping.
Stay down license plate frames $15 shipped, I have 7.
Stock starter $25 plus shipping. Works fine, I just went to a mini starter.
Jack mount transmission holder. Attach to your jack to R & R your trans. Summit sells them for $45, unused and $25 plus shipping.
All these parts work and have came off of my car thats trapped as high as 132 in the 1/4 (excluding block and cranks). Many other things I am forgetting, just ask if lyou ooking for something specific. Dont like my prices make an offer. That's all I can think of for now. May add parts as needed. I am open to trade offers, what ya got? Paypal or postal money orders only. Want a pic, just ask.
Thanks,
John
2 NA STD/STD cranks $50 or 85 shipped each in the US.
Stock tensioner $50 or $65 shipped.
Stock ECM modified to work with powerlogger, ECM only no chips. I was chasing down a problem and picked this up, the ECM did not solve what I was chasing, turned out to be something else. $55 shipped, no chips included.
NA 20 bolt oil pans $20 or $35 shipped. Does not have the baffle welded in for the turbo cars, but you can get the template (gnttype.org) and weld in your own.
TurboTweak v. 6.0 chip for Street gas and Alky, 60# injectors. $105 new, $55 shipped. I have ran as fast as 10.40 at 132 with this chip. It is fantastic.
Steering column guard with lock $60 shipped.
Remanufactured stock MAF. Works fine and does peg out at 255, $50 shipped. Took me 3 tries to find this one that worked.
Stock throttle body $45 shipped.
Stock upper plenum $35 shipped. Minor port work inside and powdercoated black, accept for the lines on top are stock/silver looking.
Engine stand transmission fixture. Allows you to work on your transmission on your engine stand instead of using a bench mount fixture. $80 plus shipping.
Stay down license plate frames $15 shipped, I have 7.
Stock starter $25 plus shipping. Works fine, I just went to a mini starter.
Jack mount transmission holder. Attach to your jack to R & R your trans. Summit sells them for $45, unused and $25 plus shipping.
All these parts work and have came off of my car thats trapped as high as 132 in the 1/4 (excluding block and cranks). Many other things I am forgetting, just ask if lyou ooking for something specific. Dont like my prices make an offer. That's all I can think of for now. May add parts as needed. I am open to trade offers, what ya got? Paypal or postal money orders only. Want a pic, just ask.
Thanks,
John