Turbo ID

[datquick6]

Came across this turbo which the seller had no info about. He claimed it came off a GN. Looks to have stock exhaust turbine. Compressor inducer measures around 58mm and exducer 76 mm. Turbine inducer is 74mm and exducer 62 mm. Those numbers look to be pretty close. Compressor wheel has 14 blades or 7 large and 7 small and turbine wheel has 11 blades. Couldn't find any numbers on the turbo besides 430683 and -11 on top of that. These we're found on the center core. Any info would be greatly appreciated .
Thanks in advance, Edgar

Posted from the TurboBuick.Com mobile app

 

[forcefed3.8's]

TE61

 

[datquick6]

That was a quick response. How sure or you on this.


Posted from the TurboBuick.Com mobile app

 

[bison]

Looks like a 60-1 compressor and a t04 69 trim turbine. Aka pt54, te61


Posted from the TurboBuick.Com mobile app

 

[datquick6]

Thanks a lot guys. As of now i have a ta-49. Plus mods on my sig.
I just got my alky kit alky chip maf translator and thdp. I plan on upgrading the converter. Within the next few months. Should I keep the 49 with stock converter or upgrade turbo and converter.


Posted from the TurboBuick.Com mobile app

 

[bison]

If you did heads and converter that turbo will make a lot of power over the 49. I went 124+ with one back in 1999


Posted from the TurboBuick.Com mobile app

 

[datquick6]

How would the 61 act with a supporting converter and stock headers, with my mods. Turbo is actually in pretty good condition. No in and out or side to side play


Posted from the TurboBuick.Com mobile app