imjoesnuffy
I just break stuff!
- Joined
- Sep 13, 2005
- Messages
- 1,541
Stay down license plate frames $20 shipped. I have about 10 of them.
Stock fuel return line $25 plus shipping.
Stock fuel feed line with a coupling in the place where they always crimp/bend during removal. Making it a 2 piece design for much easier install and removal, $35 plus shipping.
(For either fuel line I would replace the orings. They didnt leak on my car but looked pretty rough when I pulled them off. BW 27478 (borg warner) also same part# for neihoff brand 2.50 for the oring kit at local parts stores.)
Adapter fitting to make converting a Hot Air car's fuel system to an intercooled setup very easy. Screw 86/87 filter onto factory fuel line, screw on adapter then connect 86/87 stock fuel feed line. Couple edges started round, until I got the right wrench on it, still works fine $15
(2) STD/STD NA Cranks just polished. $75 plus shipping for the perfect one. The other has a scratch that will just barely catch a fingernail, may need to be turned, $25 plus shipping.
Stock fuel pump hanger in great shape, Walbro 340 pump (3-4 yrs old???) and racetronix hotwire kit $150 plus shipping. Known good, this fuel pump pushed my car to 132 mph in the 1/4 mile at the GS Nationals last month. I will be removing it tomorrow.
Will post pictures tomorrow after I drop the tank to pull the fuel pump.
Thanks,
John
Stock fuel return line $25 plus shipping.
Stock fuel feed line with a coupling in the place where they always crimp/bend during removal. Making it a 2 piece design for much easier install and removal, $35 plus shipping.
(For either fuel line I would replace the orings. They didnt leak on my car but looked pretty rough when I pulled them off. BW 27478 (borg warner) also same part# for neihoff brand 2.50 for the oring kit at local parts stores.)
Adapter fitting to make converting a Hot Air car's fuel system to an intercooled setup very easy. Screw 86/87 filter onto factory fuel line, screw on adapter then connect 86/87 stock fuel feed line. Couple edges started round, until I got the right wrench on it, still works fine $15
(2) STD/STD NA Cranks just polished. $75 plus shipping for the perfect one. The other has a scratch that will just barely catch a fingernail, may need to be turned, $25 plus shipping.
Stock fuel pump hanger in great shape, Walbro 340 pump (3-4 yrs old???) and racetronix hotwire kit $150 plus shipping. Known good, this fuel pump pushed my car to 132 mph in the 1/4 mile at the GS Nationals last month. I will be removing it tomorrow.
Will post pictures tomorrow after I drop the tank to pull the fuel pump.
Thanks,
John
