Updated massive parts list, take a look!

[BLACK MAGIC RACING]

PARTS

86/87 parts

-2 stock intercoolers - $75 each
-GN header panel (had a small piece broken out, professionally repaired) - $200
-Pair of blue plastic t-top trims, for locking t-tops, like new! - $60
-Pair of a-pillar trims, for t-top cars, fair shape - $20
-Front and rear GN seats, driver was power, now has no bracket. decent daily driver shape - $350
-Pair of GM t-top weather strips, new, unopened - $90
-Pair of anti-rattle strips, new in boxes - $40
-Stock shifter cable - $35
-Cruise control cable (2) - $25 each
-Cruise control module (2) - $50 each
-Turbo heat shield (3) - $20
-Stock engine main accessory bracket - $75
-Stock throttle cable bracket - $35
-3 stock intercooler shrouds, far from perfect - $20 each
-Pair of stock 8445 heads, complete - $150
-4 driver side intercooler brackets - $25 each
-3 passenger side intercooler brackets - $25 each
-Passenger side intercooler bracket cut for stretch intercooler - $20
-Stock oil fill tube and cap - $25
-3 stock turbo cores - $75 each
-stock front swaybar - $40
-stock balancer - $75
-stock water pump pulley - $20
-3 stock a/c compressors - $40 each
-2 stock turbo crankshafts - $150 each
-Chrome tail lights - $60 each or $100 pair
-Driver's side GN tail light assembly (chipped corner) - $60
-Passenger side taillight lens only, no bezel - $40
-Heater blower motor + fan - $40
-2 Stock flex plates - $30 each
-2 stock plenums - $30 each
-109 engine block, standard bore - $275
-2 Stock passenger side headers - $60 each
-Stock cam sensor - $40
-Like new stock oil pressure switch - $20
-Tinted rear defrost window - $75
-Stock intake - $250
-2 stock fuel rails - $70 each
-Pair of new INSIDE door dew sweeps - $40
-Pair of stock rocker assemblies - $35
-Solid driver side fender - $45
-Solid passenger side fender - $45
-Set of stock rods - $40
-Rear coil pack brace - $15
-Stock 2 BAR MAP sensor - $25
-3 Transmission dipsticks w/ tubes - $40 each
-2 Engine oil dipsticks w/ tubes - $35 each
-2 Used alternators - $60 each
-2 pairs of stock axles - $ 60 each pair
-6 rear alternator bracing brackets - $20 each
-2 powermaster cores - $100 each
-2 turbo to head brackets - $30 each
-2 stock vaccuum blocks - $20 each
-2 A/C compressor "L" braces - $10 each
-2 Alternator/compressor "Y" brackets - $20 each
-5 Flywheel inspection covers - $30 each
-Stock oil pan - $65
-3 Used GM knock sensors - $35 each
-BRF transmission for core - $275
-2 used Stock front covers - $75 each

PERFORMANCE PARTS

-6" long PTE reducer hose, 2.5-3" black - $20
-2.5" to 3" reducer hose - blue - $20
-LOKAR trans mount braided stainless trans dipstick + tube - $50
-Misc. intecooler hoses, 3", black, blue, 4" red, blue - $10 each
-2.5" 45* elbow , red - $15
-Wiseco forged pistons for 4.1, 3.965" bore, clearanced for stroker - $200
-FAST jumper box/harness for sequential - $200
-ATR external wastegate - $100
-Pair of Stage 2 Valve covers - $65
-Complete set of hooker headers - $350
-Hooker 2.5" test pipe - $20
-3" SS test pipe with dump, repaired where pipe expander split it, - $35
-Comp hi-tech moly pushrods, stock replacement - $50
-Bosch 237 fuel pressure regulator - $30
-B+M Starshifter - $ 150
-2 Laptop adapters, USB to serial port, for FAST - $35 each
-Sequential electronic tail light kit - $125
-4 Keystone turbine wheels, slotted, 2- 15x8, 2 14x7 -$100 set
-4 GTA wheels, gold centers, non- dimpled, 2 fronts, 2 rears, one stripped, light curb rash - $300
-4 87 turbo-t/85 gn wheels, all painted black between spokes, clear coated, with new center caps, like new Goodyear eagle GT2's - $600


84/85 Hotair parts

-Engine accessory bracket - $25
-Braided down pipe - $25
-4 '84 t-type wheels - $150
-83 regal header panel w/ grill - $150
-Pair of mint chrome headlight bezels - $125

V8 BUICK PARTS

-Autometer sport comp mechanical oil pressure guage - $25
-Autometer sport comp mechanical fuel press. guage- 0-15 lbs - $25
-Autometer sport comp mechanical vaccuum guage -30-0 hg - 25
-New Poston frame pads for 455 swap into regal, 64-65 skylark - $70
-Stock 350 exhaust manifolds - $80
-350 alternator/AC bracket - $35
-Stock 72 4 barrel intake - $75
-Low miles B.O.P. TH350 transmission, built to handle 650hp - $500
-B+M torquemaster 10" converter, 3200-3500 stall low miles, $175
-TA 310 hydraulic flat tappet cam + lifters, low miles, for 350 - $175
-TA competiton 350 headers - $295
-1972 350 quadra-jet, fresh rebuild+power valving - $250
-350/455 non-A/C alternator bracket - $70
-Pertronix-converted 72' 350 distributor - $125
-Ported + Polished '72 350 heads - $700
-TA 350 aluminum stage 1 intake - $300
-Like new 350 mechanical fuel pump - $25

prices do not include shipping from canada.

 

[TexasT]

I know you took a bath on the last thing I bought from you. Here's your chance to get it back.

Interested in the forged pistons for the 4.1. Are they set up for the stock rods? Do they include pins? Rings?

Shipping to 79707. Let me know.

TIA

Rich

 

[sasmith350]

got any pics of the gta's? are they 16"....and a price on shipping to 65202(columbia, mo) please

 

[GNBeswick]

Stage 2 Valve covers; probably a dumb question, but do they fit on stock heads? If so, interested, got any pics?

 

[BLACK MAGIC RACING]

Rich, i'm not entirely sure about the stock rods, as they were on 6.5" rods when i got 'em, but they do come with pins. i never re-use rings, even though they were barely used, i tossed 'em.


sasmith350, i'll take some pics tomorrow. They are 16's, and i'll get a shipping quote as well. Thanks!

 

[BLACK MAGIC RACING]

GNAsuka, don't worry, i asked the same thing once. THe answer is a resounding no, they are made specifically for stage 2 heads, a whole different animal. Sorry!

 

[K5Cruiser]

-Pair of GM t-top weather strips, new, unopened - $90

Which pieces are these? The ones that go on the T-tops or on the body?
Could you post the part number. Thanks!

 

[rmar]

Can I get a pick of the valve covers and a price shipped to 62801 USA
and what shape are the heat shields in.

Thanks

 

[FORREST]

Atr ext. gate

If you still have it,Ill take it. Let me know.I can do pay-pal, My zip is 60402. Will PM You with my info. after I here from You. Thanks,Forrest

 

[BLACK MAGIC RACING]

K5Cruiser, these are the short strips that go on the t-tops themselves.

rmar, VC pics can be seen here..

http://www.turbobuick.com/forums/parts-sale/236677-big-list-parts-sale-look.html

Heat shields are in decent shape, some are painted black, have some surface rust, ect. normal for 20 yr old daily drivers.

FORREST, still have it. it's yours if you want it.

 

[matswtt]

do you take paypal?

Bosch 237 fuel pressure regulator - $30

if so give acc. info.

thanks

 

[BLACK MAGIC RACING]

I take paypal, in fact, i prefer it, but you have to cover the 3% fee.

 

[Back_in_Black]

Interested in the Intake

PM'd on the intake

 

[mikestertwo]

PM sent.

 

[dwall]

From your list.

1) I definitely want-Pair of new INSIDE door dew sweeps - $40 - chrome strip on these? – Any idea on shipping to US 53716?


2) Very interested in condition of these
-1 Transmission dipsticks w/ tubes - $40 each
-2.5" to 3" reducer hose - blue - $20

3) How old are the tires? And how about pics of these:
-4 87 turbo-t/85 gn wheels, all painted black between spokes, clear coated, with new center caps, like new Goodyear eagle GT2's - $600

Thank you.
dwall

 

[BLACK MAGIC RACING]

dwall, the inside sweeps do have the chrome, but i'm waiting on a local guy to get back to me. if not, they're yours. Transmission dipsticks w/ tubes are in decent shape, not what i would call mint, but very good daily driver condition.-2.5" to 3" reducer hose is also in good shape.

THe tires on the t-wheels have around 150 miles on them tops, like new. I'll get you some pics in a bit. Thanks!

mikestertwo. pm replied!

Freddy

 

[sasmith350]

definitly interested in the wheels, pm me the shipping quote...

 

[sams87gn]

ac

Hi I am interested in a stock a/c compressor - $40 each Are you sure the compressor works ? if so how much to ship to 08016 USA Thanks

 

[FORREST]

ATR ext. gate

I'll take it.Sent You a P/M. Thanks

 

["Reaper"]

do you still have the Hooker 2.5" test pipe?How much shiped to 32405?Do you have any pics?