Vacuum block hard line set - 87 GN

[meanchicken]

Looking for a good, undamaged set of the hard lines that attach to the vacuum block on the top of the engine. I only need the two line piece that routes down the passenger side of the fuel rail, but I'll take a full set if available.

Tim

 

[meanchicken]

bump....still looking...

 

[1 QWIK 6]

I have an NOS 2 pc set if interested? reply to copbike@hotmail.ca thanks

 

[jretrodude]

I have a nice set as well. PM me for details

 

[meanchicken]

Bump.

 

[TurboTGuy]

http://www.grandnationalspecialties.com/servlet/the-1661/86-dsh-87-GRAND-NATIONAL-T-dsh-TYPE/Detail

 

[meanchicken]

http://www.grandnationalspecialties.com/servlet/the-1661/86-dsh-87-GRAND-NATIONAL-T-dsh-TYPE/Detail

Thanks....saw these before but appears to only have the 3 line set....I need the two line set that goes to the MAP and PVC.

 

[turbohh]

I have this set that I purchased from Cottons... I needed the same rear 2-line set as you since my original one had the mounting tab for the boost line broken off... As you can see, the coating is a little tired, and more importantly, Cottons sent me a set that had that line broken off about an 1-1/2 inches from the end of the PCV line, so no tab whatsoever... Sigh!!, LOL. I wound up JB-Welding my original tab back on... Not sure if this will work for you, but I'd love to get rid of this set. PM me if you're interested.
John A, Turbohh

 

[meanchicken]

Thanks but I'll look for a better set.
I could actually make my 2 liner work by cutting about 2" off of it.....but would rather have a complete and flared line.

 

[turbohh]

No worries here... good luck with your search...
John A

 

[TurboTGuy]

Thanks but I'll look for a better set.
I could actually make my 2 liner work by cutting about 2" off of it.....but would rather have a complete and flared line.

Our Maker found it fit to cut 2 inches and a flare out of my line and I still manage operate just fine, well, that is except for the pointing and laughing........... FML.......

 

[Squid4life]

Chicken, you find a set yet? I think I have a set or two in the garage I was going to powder coat and either sell or swap onto my car. Let me know if you need them, what's a fair price and where you are. I can either try to meet or ship them either way.

James

 

[meanchicken]

Still looking.
Someone else is supposed to send me pix of a set he has....
I'm in zip code 92688.
PM me with what you're looking to get for them as is....the price in the link that Guy posted is prolly fair...
If you have pix...please send...
I really only ned the 2 line set (PAP and PCV) but will take both if that's how you want them to go.

My two liner is showing it's wear and tear....looks to be starting to split down on the flaired end over a length of about 1.5"
Still works but it's a matter of time.

 

[Squid4life]

Chick, sorry for the delay... Baseball, football, and halloween got in the way.

Here are the ones I have. No cracks or splits. Could use a paint job...

I will shoot you my paypal and address in a PM. Looks like about $6 to ship, and don't need to make a bunch of money off of these. You choose what is fair, brother.

James


PS scoobie chair not included.

 

[gnbeginer]

I have a line set you can have, jus pay me back on shipping. Jus had em blasted so you can paint powder coat or chrome em. they wont work with my m&a intake. Gonna have to make some that will work with it. pm me ur address and I'll mail it out next week. if ya need a pic of em - shoot me a cell number and i can take care of that too. heres my cell number if ya wanna call on em. 219-964-7660

 

[meanchicken]

I have a line set you can have, jus pay me back on shipping. Jus had em blasted so you can paint powder coat or chrome em. they wont work with my m&a intake. Gonna have to make some that will work with it. pm me ur address and I'll mail it out next week. if ya need a pic of em - shoot me a cell number and i can take care of that too. heres my cell number if ya wanna call on em. 219-964-7660

DEAL!
Check your PM in a minute.