bob86gn
Senior Member
- Joined
- May 24, 2001
- Messages
- 503
Finally, fired the car up with the exhuast on tonight and the valvetrain is very noisy. How long should it take to get oil to the lifters? The car sat for about 6 weeks while I swapped the heads but the lifters and cam where not removed.
Champion Aluminum heads with longer lifters from Cottons, stock rockers torqued to 25 ftlb. Drove about a block and the knock gauge was all over the place.
Any ideas?
Champion Aluminum heads with longer lifters from Cottons, stock rockers torqued to 25 ftlb. Drove about a block and the knock gauge was all over the place.
Any ideas?
