Well motor mounts are finished:biggrin: . Trans. cross memeber is finished:biggrin: . Turbo is on order:biggrin: . Rack n pinion on order( found on on ebay cheep):biggrin: . A second set of manifolds are on there way too . looking for a good core support mine is rotted and tweeked . Id like to find a firberglass front bumper.
Trans cross memebr finished.... Here is a picture. What I did was cut off the old mounting tab added a piece of box tubing then weled the mounting tab to the end of the box tubing
Bought a Used core support today it is in much better shape than my old ****ter one I had.....
Also traded my stock tranny for a Percesion FMIC
Oh yea I bought a second drivers side manifold and got it on it looks like this will be the ticket at least for me it will be. I have 2 drivers side manifold both are facing foward drvrs side ams down pass aims up. Plan is to bring a pipe from the drvrs side over to the pass side then a short pipe off the pass manifold mate the 2 togetherthen mount the turbo on top of that. its going to close to the hood but it looks like it will clear.... I ordered some exhaust piping to make the cross over pipe should have it done by next weekend.
I would have never thought this would be this hard to find but it is....
I am looking for the exhaust flange that would attach to the stock 1500 exhaust manifold. I have the donut to seal it with just need the flange and about 6-12"s of pipe.
a friend of mine did this 4.8 bottom end ls1 heads ls2 intake a nasty turbo cam and a pte 88. Hes using 60/65 lbs injectors and a hp tuners speed dens tune. Its wicked it spins the 295/65/15 drags at 70mph like it has regular tires.
I would have never thought this would be this hard to find but it is....
I am looking for the exhaust flange that would attach to the stock 1500 exhaust manifold. I have the donut to seal it with just need the flange and about 6-12"s of pipe.